bana yapilmaz ama bu : calisan ubuntu'yu windows vmware altina akarma

[zpnd]

Selam,

Linux kullanicisiyim, ubuntu faniyim. Arada basimi agritsa da <3 linux ve fena sekilde alismis haldeyim. Gelin gorun ki isyerinde kurulan bir kac yeni sey ve connect kart yuzunden vindoz kullanmam sart oldu.

Ubuntu altinda vmware ile vindoz calistirmak bir cozum ama donanimlar icin pek fayfasi olmuyor. sadece vindoz ile calisan donanimi aktif ettigim anda cakiliyor vmware. Bu yuzdendir ki tek secenek vindoz kurmak kaliyor.

Sorun su ki su anda kullandigim ubuntu sistemi birakmak istemiyorum. Bir sekilde su andaki sistemimin imajini alip bu imaji vmware sanal diski haline getirmem lazim.

vindozda konsolu acinca ls yaziyorum, whois yaziyorum lan. Elim ayagim birbirine dolasiyor ne yapacagimi sasiriyorum. Cok kotu durumdayim cok =(

[GERGE]

High-level Process Overview:

1. Obtain a bootable CD or DVD that contains the image you wish to
convert.

2. Create a new MS-DOS virtual machine of the correct size (i.e., at
least the same size as the physical partition that was Ghosted) and boot it
from the Ghosted CD or DVD.

3. Restore the Ghosted image to your new virtual machine.

4. Configure another virtual machine with the same operating system as
the one you just restored from the Ghosted image.

5. Boot another virtual machine with the same operating system as the
one you just restored from the Ghosted image

6. Boot the virtual machine you just created.

------------------------------------
------------------------------------

Detailed Instructions:

These instructions assume that a Ghosted image already exists on a bootable
CD or DVD. You will also need an existing virtual machine with the same
operating system as the image you wish to convert. For example, if you have
an image of Windows 2000 Advanced Server, you will need an existing
installation of Windows 2000 Advanced Server on VMWare. In addition, this
assumes that the image you are converting has been created with an IDE
drive. Converting SCSI drives is very complicated and not within the scope
of this article. Please read and execute these instructions carefully, as
each step within depends on successful completion of the previous step!

------------------------------------

1. Obtain a bootable CD or DVD that contains the image you wish to
convert.

------------------------------------

2. Create a new MS-DOS virtual machine of the correct size and boot it
from the Ghosted CD or DVD.

2.1. Start VMWare

2.2. Go to the File menu, choose New, then New Virtual Machine and click
Next.

2.3. Click Custom, then Next.

2.4. Under Guest Operating System, choose MS-DOS. This is important
because VMWare will look at this virtual machine as an IDE drive. Again,
attempts to convert a SCSI image did not work in this scenario. I am not
sure why.

2.5. Under Virtual Machine Name, choose a name for the virtual machine you
will ultimately be using after conversion.

2.6. Next, choose how much memory you wish to allocate to the virtual
machine you will ultimately be using after conversion. Note that these
numbers can be changed by the individual user based on how much memory they
will use keeping in mind how much physical RAM they have.

2.7. Click Next.

2.8. Under Network connection, choose Use bridged networking and click
Next.

2.9. Click Create a new virtual disk and click Next.

2.10. Under Specify Disk Capacity, you need to specify,
in gigabytes, how large to make the new disk. Note that you need to make
the disk size at least as large as the image you are about to restore, and
also need at least as much free space as you specify to allocate.

2.11. Click Allocate all disk space now and click Next. A
warning message will appear asking if you're sure that's what you want to
do. Be sure you have enough free space to create that size of a file.

2.12. Click OK to clear the warning message and allocate
the disk space.

------------------------------------

3. Restore the Ghosted image to your new virtual machine.

3.1. With the virtual machine powered off, place the DVD or CD with the
image you want to restore into the DVD drive.

3.2. Boot the virtual machine.

3.3. Follow the instructions onscreen to boot from the CD/DVD ROM drive.

3.4. Follow the instructions to restore the image from CD/DVD onto the
virtual hard drive.

3.5. When imaging is complete, shut down the virtual machine and remove
the CD/DVD from the drive.

------------------------------------

4. Configure another virtual machine with the same operating system as
the one you just restored from the Ghosted image (assumes you already have
another virtual machine with the same OS installed).

4.1. In VMWare, select the virtual machine that has the same operating
system as the one you just restored from Ghost.

4.2. Go to the Edit menu and choose Virtual Machine Settings.

4.3. Click the Add button and click Next.

4.4. Choose Hard Disk and click Next.

4.5. Click Use an existing virtual disk and click Next.

4.6. Use the Browse button to navigate to the VMDK file for the image you
created. For example My DataMy Virtual MachinesTestTest.vmdk.

4.7. Click OK. The new virtual hard disk will be added.

------------------------------------

5. Boot another virtual machine with the same operating system as the
one you just restored from the Ghosted image. This will allow you to add
the appropriate HAL.DLL file to the virtual machine, thus enabling it to
boot in VMWare.

5.1. Boot the virtual machine to which you just added the new virtual hard
disk.

5.2. Log into the virtual machine as an administrator.

5.3. On the Windows desktop, right-click My Computer and choose Manage.

5.4. Click Disk Management. You should see a disk in the right window
pane for the virtual hard drive you just added.

5.5. Right-click the new hard drive and choose Change drive letter and
paths.

5.6. Assign a driver letter to it (e.g., Z:).

5.7. In the virtual machine you are currently running, navigate to the
system driveWINNTsystem32 folder.

5.8. Search for the HAL.DLL file and copy it to the clipboard.

5.9. Navigate to Z:WINNTsystem32.

5.10. Rename the existing HAL.DLL there to HAL.dll.old.

5.11. Paste the HAL.DLL from the currently running
virtual machine in the Z:WINNTsystem32 folder.

5.12. Go to the Start menu and choose shut down to turn
off the virtual machine.

------------------------------------

6. Boot the virtual machine to which you just created and copied the
appropriate HAL.DLL file. At this point, the virtual machine you created
from the Ghosted image should boot correctly with a minimum configuration
(i.e., no sound, 640x480 resolution, etc.). From here, you will need to
install the VMWare tools in the new operating system.

6.1. In VMWare, select your new virtual machine.

6.2. Go to the Edit menu and choose Virtual Machine Settings.

6.3. Click the Options tab.

6.4. Under Guest Operating System, change it to read the correct OS you
restored from the ghosted image (e.g., Windows 2000Advanced Server). This
is very important, as the next steps will not work properly if you choose
the wrong OS.

6.5. Click OK.

6.6. Click Start this virtual machine.

6.7. Give the virtual machine time to boot and log in as an administrator.

6.8. If you see any plug and play messages at this point telling you to
install new hardware, ignore them.

6.9. Once the machine is booted and the new hard ware massages are gone,
go to the File menu in VMWare and choose Install VMWare Tools.

6.10. Follow the instructions to complete the
installation of the VMWare Tools. This will tell the operating system which
virtual hardware drivers to use so it can talk to the host operating system.

6.11. After the installation of the VMWare tools, you
will be prompted to restart. It is a good idea to do so at this point.

6.12. Once restarted, you may do any additional
configuration and testing of the new virtual machine.