Çıldırtan DVD yazıcı

[Eralp]

Laptopumun bi dvd yazıcısı var, kendisi deli resmen. Cd yazmaya çalıştıydım vaktinde onu bile başaramamıştı, nerodan bazı ayarları değiştirip tekrar denediğimde becerdi zar zor. Şimdi de dvd yazmaya çalışıyorum önce çoklu oturumlu disk denedim onda direk %4civarında

iç hedef başarısızlığı
bir kerede diskin sonu yapılamadı

diye bir hata verdi. Sonra dedim çoklu oturumsuz yapayım bu sefer %40 lara kadar yazdı ondan sonra aynı hatayı verdi.

Ne yapmam gerekir, nero 7 kullanıyorum, 8 e geçsem veya başka bir yazılım kullansam faydası olur mu? Veya sürücü eksikliğinden falan mı kaynaklanıyordur problem?

Hata log unu da buraya koyayım

Log

TEKBIM
-
1C82-A0K5-19E5-MAAX-400E-1M51-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: Version: HJ02 - HA 1 TA 0 - 7.10.1.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: HJ02 - HA 1 TA 0 - 7.10.1.0
Adapter driver: HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS541080G9SA00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GMA-4082N atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GMA-4082N E: CdRom0
MagicISO Virtual DVD-ROM F: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
BUFE : 0
Physical memory : 503MB (515372kB)
Free physical memory: 185MB (189900kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.8.2010
UDF derlemesi
13:02:10 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

13:02:10 #2 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

13:02:10 #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

13:02:11 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2290271 (508:56.71, 4473MB)

13:02:11 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

13:02:11 #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GMA-4082N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

13:02:11 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:02:11 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2290272 (2290272) = #2290272/508:56.72
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2290272 blocks [E: HL-DT-ST DVDRAM GMA-4082N]
--------------------------------------------------------------

13:02:11 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GMA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4690477056, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2290272 | 0 | 0x00
2290272 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

13:02:11 #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

13:02:11 #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

13:02:11 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

13:02:11 #13 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

13:02:11 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

13:02:11 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5.540 KB/s)

13:02:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:02:11 #17 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

13:02:11 #18 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

13:02:11 #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 73340800

13:08:22 #20 SPTI -1061 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
CDB Data: 0x2A 00 00 0D D7 E0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 35 00 04 0E 44 90
Buffer x092c6480: Len x10000
0xC5 DA 47 99 EF EC EB 8F 8C 76 33 17 CA 66 0F 9B
0xE6 2D 17 7B 03 62 FD 90 F7 8A 3A 56 79 36 C9 0C
0xC8 38 57 DD 20 BD 3A 6D 6B BC 9C 72 76 20 10 50

13:08:22 #21 CDR -1061 File Writer.cpp, Line 303
Internal target failure
E: HL-DT-ST DVDRAM GMA-4082N

13:08:22 #22 SPTI -1061 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 10 35 00 04 0E 44 90

13:08:24 #23 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 907232

13:08:24 #24 CDR -1061 File WriterStatus.cpp, Line 162
Internal target failure
E: HL-DT-ST DVDRAM GMA-4082N

13:08:24 #25 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

13:08:24 #26 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5.540 KB/s)

13:08:24 #27 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:08:39 #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

13:08:39 #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)

Cevaplar için teşekkürler :)